日程安排



7月13日 第一天

主会场
8:50~9:00 致欢迎辞 Welcome
- 刘源 博士, 大中华区总经理, Altair
Dr. Liu Yuan, General Manager, Altair Greater China

9:00~9:30 主题报告: Altair愿景及行业趋势洞察 Design the Difference: Altair Vision and Industry Insights
- Brett Chouinard, 首席运营官(COO), Altair Engineering Inc.

9:30~10:00 主题报告: 从《汽车产业中长期发展规划》看数字模拟技术发展方向 The Direction of Digital Simulation Technology Indicated from 《(China) Medium & Long Term Development Plan of Automobile Industry》
- 周舟 博士,副院长,中国汽车工程研究院
Dr. Zhou Zhou, Vice-President, CAERI

10:00~10:20 coffee break

10:20~11:00 主题报告: 主题报告: Altair企业方案愿景:物联网、大数据分析等 Altair Enterprise Solutions
- Mahalingam Srikanth, 首席技术官(CTO),Altair Engineering Inc.

11:00~11:30 主题报告: 增材制造技术在大型民机上的应用 Application of additive manufacturing technology in large civil aircraft
- 张嘉振 博士,中国商飞副总师/中国商飞增材制造技术中心主任
Dr.Zhang Jiazhen, Vice Chief Designer of Beijing Aeronautical Science & Technology Research Institute (COMAC-BASTRI)

11:30~12:00 主题报告: Altair技术 - 概观和展望 Altair Technology - Overview and Outlook
- 周明 博士, 软件开发高级副总裁,Altair Engineering Inc. Dr. Zhou Ming, Senior VP, Altair Engineering Inc.


技术专题1 创新技术 (Innovative Technologies)
14:00~14:30 基于Altair MotionSolve的创新方案 Innovate with MotionSolve
- Rajiv Rampalli, 软件开发副总裁, Altair Engineering Inc.

14:30~15:00 传动系统飞溅润滑CFD仿真
Oil Splash Lubrication CFD Simulation in Driveline
- 许洲, CAE主管,上海纳铁福传动系统有限公司
Xu Zhou, Team Leader Modelling & Analysis, Shanghai GKN HUAYU Driveline Systems Co., Ltd.

15:00~15:20 基于实测动态道路载荷谱的车辆疲劳性能设计
Vehicle Durability Design based on Actually Measured Road Dynamic Loads
- 董国红, 结构分析主任工程师, 上汽通用五菱汽车股份有限公司
Dong Guohong, Chief Engineer of Structure Analysis, SGMW

15:20~15:40 coffee break

15:40~16:10 新能源车电池仿真:RADIOSS求解器电池均质层法
Battery modeling under crush conditions. Development of a homogenized model including the rupture in RADIOSS based on the research done by Elham Sahraei at MIT
- Jean-Michel TERRIER,副总裁(RADIOSS),Altair Engineering Inc.

16:30~16:50 试验协同仿真- VIC-3D非接触全场应变测量系统
Non-contact Deformation Measurement Systems VIC-3D
- 卢顺杰,总经理,北京睿拓时创科技有限公司
Lu Shunjie, General Manager, Beijing Ruituo Tech Ltd.

16:50~17:10 基于HyperWorks风电机组前机架的结构优化
Structural Optimization Design of Main Frame Based on HyperWorks
- 刘彪,CAE工程师,上海电气风电集团
Liu Biao, CAE Engineer, Shanghai Electric Power Generation Group

技术专题2 电磁仿真技术 (Electromagnetics Simulation)
14:00~14:30 HyperWorks电磁方案 - 新功能与应用
EM Solutions in HyperWorks – New Features and Applications
- Dr. Jordi Soler, 电磁方案业务拓展总监, Altair Engineering Inc.

14:30~15:00基于HyperWorks平台整车正向开发
Forward Development of Full-Vehicle Based on HyperWorks Platform
- 闫洪,CAE专家,蔚来汽车
Yan Hong, CAE Chief Expert, NextEV

15:00~15:20 FEKO雷达隐身仿真中收敛改善技术
Convergence Performance Improvement Techniques in FEKO Radar Stealth Simulation
- 高伟,工程师,某研究所
Gao Wei, Engineer, an aviation research institute

15:20~15:40 coffee break

15:40~16:10电磁计算方法研究及进展
Research & Development of the Methods for Computational Electromagnetics
- 陈如山 教授,南京理工大学
Prof. Chen Rushan, Nanjing University of Science & Technology

16:10~16:30借助FEKO仿真提升福特公司EMC/EMF测试和设计
FEKO Simulation Technologies Promote the EMC/EMF Tests and Design in Ford
- 彭鹏,EMC专家,福特汽车工程研究中心
Peng Peng, EMC Expert,Ford Motor Research & Engineering Center

16:30~16:50 GPU加速方案助力Altair产品应用
GPU-Accelerated Altair Apps
- 蔡欣欣,产品经理,丽台(上海)信息科技有限公司
Victor Cai, Field Application Engineer,
Leadtek (Shanghai) Research Inc.

16:50~17:10 FEKO在雷达天线领域的仿真和应用
Using FEKO for Rada and Antenna Simulation
- 赵伟,南京电子技术研究所
Zhao Wei, Nanjing Electronic Technology Institute

技术专题3 高性能计算与云技术 (HPC & Cloud Technologies)
14:00~14:30
高性能数据分析方案
High Performance Data Analytics (HPDA)
- Doron Helfman, 全球技术运营副总裁, Altair Engineering Inc.

14:30~15:00 HPC的重要性:今天、明天和未来
HPC Matters: Today, Tomorrow and Beyond
- Satish Kanagala,企业计算解决解决方案总监,Altair Engineering Inc.

15:00~15:20 华为创新计算加速工业CAE仿真
Huawei's Innovative Computing Solution Accelerates Industrial CAE Progress
- 张华,服务器市场管理部部长,华为技术有限公司
Zhang Hua, Director of Server Marketing Management, Huawei Technologies

15:20~15:40 coffee break

15:40~16:10 广汽传祺研发仿真中高性能计算集群应用
Application of HPC Cluster in CAE Design of GAC Engineering
- 王力,高性能计算团队负责人,广汽研究院
Wang Li, Leader of HPC Team, GAC Engineering

16:10~16:30 Dell HPC 高性能计算解决方案
Dell HPC Solution
- 凌巍才,高性能计算方案架构师,戴尔(中国)有限公司
Forrest Ling, HPC Enterprise Technologist, Dell China Co Ltd

16:30~16:50吉利汽车HPC及仿真平台发展
Geely HPC and Simulation Platform Development
- 王硕,IT工程师,吉利汽车研究院
Wang Shuo, IT Engineer, Geely Automobile Research Institute

16:50~17:10云管理平台
Cloud Manager
- 王轶华,技术经理,Altair China
Wang Yihua, Technical Manager, Altair China


技术专题4 创新工业设计 (Innovative Design for Manufacturing)
14:00~14:30仿真驱动3D打印设计
Simulation Driven Design for 3D Printing
- Dr. Armin Veitl, 技术总监, Altair Engineering Inc.

14:30~15:00
利用HyperStudy和solidThinking对塑料中空管道进行优化设计
Optimization Design of Plastic Hollow Pipe Structure for Buried Drainage by HyperStudy and solidThinking
- 朱红红,仿真工程师,深圳创新设计研究院
Zhu Honghong, Simulation Engineer, Shenzhen Institute for Innovative Design (SIID)

15:00~15:20产品优化设计与3D打印
Product Optimization Design and 3D Printing
- 王佳骏,项目经理,西安铂力特激光成形技术有限公司
Wang Jiajun, Project Manager, Xi'an Bright Laser Technologies LTD

15:20~15:40 coffee break

15:40~16:10 solidThinking Inspire在卫星动量轮支架优化设计中的应用
solidThinking Inspire Application in Optimization Design of Momentum Wheel Bracket
- 许焕宾,中国空间技术研究院总体部
Xu Huanbin, China Academy of Space Technology

16:10~16:30 solidThinking Inspire在吉利商用车轻量化设计的应用
solidThinking Inspire Application in Geely Commercial Vehicle Lightweight Design
- 张克鹏,主任工程师,浙江吉利控股集团有限公司
Zhang Kepeng, Principal Engineer, Geely

16:30~16:50 Stratasys 3D打印制造解决方案
Stratasys 3D Print Manufacturing Solutions
- 姚志坚,汽车行业经理,Stratasys
Yao Zhijian, Manager of Automotive Industry, Stratasys

16:50~17:10 结合3D打印,XX型卫星3头星敏感器支架的优化
Using 3D Printing for Optimization of a Satellite Part
- 聂中原 北京卫星制造厂
Nie Zhongyuan

18:30-20:30
晚宴与RADIOSS竞赛颁奖礼


7月14日 第二天

行业专场A - 航空航天 (Aerospace & Aviation)
9:00~9:30 HyperWorks全球航空航天应用
HyperWorks Aero Applications
- Dr. Shan Nageswaran, 高级总监, Altair Engineering Inc.

9:30~10:00飞行器结构轻量化与性能优化设计
Lightweight Design and Performance Optimization of Aircraft Structure
- 朱继宏 教授,机电学院副院长
Prof. Zhu Jihong, Deputy Dean of School of Mechanical Engineering

10:00~10:20 FEKO/WinProp/Flux在全球航空、航天及船舶领域的关键应用
Global Key Applications of FEKO, WinProp and Flux in Aerospace, Aviation and Navy
- Dr. Jordi Soler, 电磁方案业务拓展总监, Altair Engineering Inc.

10:20~10:40 FEKO在有耗半空间天线设计中的应用
Using FEKO for Antenna Design with Lossy Half Space
- 张小林 博士,高级工程师,华东电子工程研究所
Dr.Zhang Xiaolin, Senior Engineer, CETC

10:40~11:00 coffee break

11:00~11:20 电子设备力学环境适应性设计
Adaptive Design of Mechanical Environment of Electronic Equipment
- 焦春旺博士,高级工程师,西南电子设备研究所
Dr. Jiao Chunwang, Senior Engineer, Southwest Electronics Equipment Institute

11:20~11:50 HyperWorks在航空航天及复合材料行业的应用及开发
- 洪清泉,总经理,上海波客实业有限公司
Hong Qingquan, General Manager, Aerobook

11:50~12:10 FEKO在雷电防护中的应用
FEKO Applications in Lightning Protection
- 苏丽媛,电磁环境效应与光电工程国家重点实验室
Su Liyuan, Lecturer, National Key Lab of Sci. & Tech.

12:10~12:30 航空系统雷达隐身设计与仿真解决方案
RCS Design and Simulation Solution for Aviation System
- 王晓峰,FEKO高级应用工程师,Altair China
Wang Xiaofeng, FEKO senior application engineer, Altair China


行业专场B – 汽车 (Auto)
9:00~9:30多学科系统仿真驱动e-Mobility设计
Multidisciplinary System Simulation Driven e-Mobility Design
- Richard Yen, 高级副总裁, Altair Engineering Inc.

9:30~9:50 HyperWorks在上汽自主品牌开发中的应用
Application of HyperWorks in SAIC Self-owned Brand Development
- 王大志,总监,上汽集团股份有限公司技术中心
Wang Dazhi, Director, SAIC MOTOR

9:50~10:10虚拟仿真及优化设计应用案例
Simulation and Optimization Design Application in PATAC
- 邱荣英,泛亚汽车
Qiu Rongying, PATAC

10:10~10:30东南汽车平台化开发策略
Platform Development Strategy of Soueast Auto
- 刘瑞,汽车研究院整车集成室科长,东南(福建)汽车工业有限公司
Liu Rui, Section Chief, Soueast Auto

10:30~10:45 Altair外部空气动力解决方案
Altair’s External Aerodynamic Solution
- Dr. Marc Ratzel, CFD方案总监, Altair Engineering Inc.

10:45~11:00 coffee break

11:00~11:50 NVH开发业界最佳实践
Industry Best Practice in NVH Development
- Guan Jianmin, 机械振动与噪声方案总监, Altair Engineering Inc.
联合演讲:Brüel & Kjær,上汽通用五菱(SGMW)

11:50~12:10 SnRD异响仿真在整车NVH正向开发中的应用
SnRD Application in Full-Vehicle NVH Development
- 程林, 整车虚拟集成主任工程师, 吉利汽车研究院
Cheng Lin, Geely

12:10~12:30 优化助力华晨汽车底盘研发 ——实现副车架性能重量双飞跃
Optimization tool assists the R&D of vehicle chassis in Brilliance -- realize the improvement of both performance and lightweighting
- 杨宁宁, 华晨汽车工程研究院
Yang Ningning, Brilliance Auto


行业专场C - 通用机械与电子 (General Machinery & Electronics)
9:00~9:30仿真平台助力设计创新
Powering Design Innovation with Simulation Technology
- Molly Heskitt, 高级总监, Altair Engineering Inc.

9:30~10:00 RADIOSS在气体包装上的应用
RADIOSS Application in Gas Packing
- 郭斌,数字工程平台副总经理,深圳创新设计研究院
Guo Bin,Deputy GM of Digital Engineering Platform,SIID

10:00~10:20 仿真能力建设及在产品开发流程中的应用
Simulation Capacity Building and it's Applications in Product Development Process
- 寇大贺,技术专家/仿真技术主管,华为终端有限公司
Kou Dahe, Techical Expert/Simulation Techincal Leader, Huawei Device Co., Ltd

10:20~10:40 基于WinProp无线传播模型的MR地址指纹库定位研究
Research on MR Location of the Address Fingerprint Library Based on Wireless Communication Model of WinProp
- 杨鹏,产品经理,深圳市名通科技股份有限公司
Yang Peng, Product Manager, Shenzhen Mastercom Technology Corp.

10:40~11:00 coffee break

11:00~11:20 智能型模块化全方位移动载具平台
Intelligent Modular for Building Automatic Guide Vehicle Platform
- 杨光勋 博士,车辆结构与系统组,金属工业研究发展中心Dr. Yang Guangxun, Engineer, MIRDC

11:20~11:50 AcuSolve在电机驱动系统热仿真中的应用
AcuSolve Application in Thermal Simulation of Motor
- 田枫林,热仿真工程师,北京动力源科技股份有限公司 Tain Fenglin, Thermal Simulation Engineer, Beijing Dynamic Power Co., Ltd.

11:50~12:10 基于OptiStruct的挖掘机斗杆结构优化设计
OptiStruct Application on Arm of Excavator
- 冯豪 博士,CAE专家,广西柳工机械股份有限公司
Feng Hao, CAE Expert, LiuGong Machinery Co., Ltd

12:10~12:30 零门槛仿真二次开发工具在通讯产品中的应用
The Simulation Tools of Process Automation Applied in Communication Products with 0 basis
- 肖守春,DFR工程师,中兴通讯
Xiao Shouchun, DFR Engineer, ZTE


主会场
14:00~14:30主题报告:建模与可视化
Modeling and Visualization
- David Ravi, HyperWorks开发总监, Altair Engineering (Japan), Ltd.

14:30~15:00主题报告:虚拟仿真及优化驱动产品设计与创新——HyperWorks相关产品在越野车设计开发中的应用实践
Simulation & Optimization Driven Product Design & Innovation - Using HyperWorks for Design and Development of Off-Road Vehicles
- 汤晓东 博士,副院长,北京汽车集团越野车研究院
Dr.Tang Xiaodong, Vice-President of BAIC Group Off-Road Vehicle R&D Center

15:00~15:20创新设计大赛启动仪式
Launch Ceremony of 2017 Innovation Design Contest
- 深圳创新设计院 & Altair
SIID & Altair

15:20~15:40 coffee break

15:40~16:30 “智创新 慧设计”高峰论坛
Panel Discussion -- Design the Difference
- 特邀嘉宾:李明,汤晓东,张卫红,刘剑锋,Richard Yen
主持:黄培

16:30~17:00优秀论文颁奖与幸运抽奖,会议闭幕
Paper Award and Luck Draw, Conference Closing

常见问题

Sponsors

Gold Sponsors

RUITUO aerobook huawei leadtec-nvidia dell stratasys bolite

Exhibitors

FEMFAT

Media Sponsors

zx e-works weibo weibofangzhen